OUR SERVICES
Hobs installation services
When we deliver your new home appliance, our delivery Partners can install it too, and remove your existing appliance for recycling, or re-use the item where possible, at the same time.
Simply add both the Installation and Recycling Service options to your basket alongside your new home appliance.
Find our home appliance installation service full terms and conditions here
What to check?
Below, we explain what you need to check and what to do if your current setup isn’t suitable for the appliance you’d like to buy. To ensure a successful installation, it is vital that you review these sections before booking.
How to ensure a successful installation
How to ensure a successful installation
In order for us to be able to successfully install your new appliance, we need you to carry out some checks within your home to ensure your new appliance will be compatible
The six-point checklist
Watch the video and read the checklist below to find out what you need to check before booking an installation service.
What to Expect: Cookers Installations
What to expect from an installation service
We can deliver and install your new hob, cooker or oven, so you’ll be set up and ready to enjoy it.
Find out what to expect and the benefits of our installation service by watching the short video.
Power
Fuel Type
If you’re planning to switch fuel type – from gas to electricity, or want to have a gas or dual fuel appliance installed, you’ll need to speak to a Gas Safe registered engineer as currently, we do not offer this service. Our engineers can help with electrical appliances, but you must have the correct supply already in place, and within one metre of where you want the new hob to go.
What to do if your setup is unsuitable
If you don’t have a gas supply then you’ll need to choose an electric hob instead.If you have no electricity supply, including if the supply is over 1 metre away from your desired hob location, speak with a qualified electrician about the work required.
Amperage
If you’ve chosen an electric hob, make sure you have sufficient amperage for it. For a traditional socket outlet, your new hob must have a power rating of 13 amps – look for the amperage on our product specifications. If you have a cooker circuit, you can opt for a more powerful, higher rated appliance (as long as the circuit is equal to or above the rating of the hob amperage).
What to do if your setup is unsuitable
If you’re not sure of your current setup, try looking at your fuse box. This should tell you the amp rating of your hob circuit, which you can then compare with the amperage of your chosen appliance.
Speak to a qualified electrician if you have any concerns or questions about your power supply.
SPACE
Space
Measurements
Please check the dimensions of your chosen hob. If you need a slightly larger space and your worktops are made of wood or laminate, we can adjust the hole for you. You’ll find all the information you need in the product specifications on our website
What to do if your setup is unsuitable
If you have a stone or granite worktop, we’re unable to adjust the size and an alternative hob appliance with different measurements may be more suitable instead.
Clearance
You also need to check that the clearance between the hob and any cooker hood or kitchen unit above is within the manufacturer’s guidelines. A gas hob will usually need more clearance. An image with the specific manufacturer's guidelines can be found on individual hobs imagery.
What to do if your setup is unsuitable
If the clearance height is not suitable, the height of the cooker hob or kitchen unit above will need to be adjusted. A tradesperson may be required.
Location
Hot Zone
The area between the hob and hood is known as the ‘hot zone’, and this must be clear of any plug sockets or flammable materials.
- Wallpaper
- Plug Sockets
- Window sills
- Blinds
- Curtains
What to do if your setup is unsuitable?
These must be removed before any installation can go ahead. Depending on the complexity, you may need to book a tradesperson or electrician to carry out the work.
Appliance Under Hobs
Some hobs are not designed to be fitted above appliances, so you’ll need to double-check this on your chosen model. Where appropriate you’ll find ventilation gap diagrams on individual hobs pages. on our website.
What to do if your setup is unsuitable
If the appliance, usually a laundry appliance, is not suitable to be placed under a hob its location will need to be changed or you will need to find a more suitable location for the hob.
Download and complete the installation checklist before booking a service
Please note that if your existing home setup doesn’t meet all six of the requirements, we may not be able to install your new hob on the day.
Installation and recycling prices
Installation Price
Electric or Induction hob: £110
Recycling
Per appliance: £25
If you have only booked a recycling service, please disconnect your current appliance from the electricity supply. For gas appliances, please seek qualified help to do this. Read our guide to recycling electrical and electronic products.
If your appliance is being delivered directly from the supplier and you would like them to complete an installation service, please call 0345 604 8835 to book once you have purchased the appliance.
FInd out more about our home appliance installations here